Main page » Ribbons, Films & Cleaning » RFID Reader » RFID Reader Elatec TWN4 MultiTech 2 HF+LF - T4BT-FB2BEL6
RFID Reader Elatec TWN4 MultiTech 2 HF+LF - T4BT-FB2BEL6
RFID Card Reader Elatec TWN4 MultiTech 2 HF+LF DT-U20-b at a Top Price
Elatec's TWN4 family of transponder readers and writers enables users to read and write with almost all 125 kHz, 134.2 kHz and 13.56 MHz tags and / or labels. It supports all major transponders from various vendors such as ATMEL, EM, ST, NXP, TI, HID etc. and ISO standards such as ISO14443A / B (T = CL), ISO15693, ISO18092 / ECMA-340 (NFC). NFC is supported by Android smartphones from OS version 4.3.
The TWN4 MultiTech 2 Reader has integrated RFID (LF & HF) and NFC supported by mobile phones with Android version 4.3 or higher. The app on the reader communicates with the NFC module using simple commands. This reader is infield upgradeable and has a powerful SDK for writing apps that run directly on the reader.
Transmit frequency: 125 kHz/134.2 kHz (LF) / 13.56 MHz (HF) ANTENNA
Interfaces: via USB or RS-232; RS-232
READ / WRITE DISTANCE up to 100 mm depending on environment and transponder transmission speed
NFC Active and passive communication mode
Dimensions: 88mm x 56mm x 18mm
Weight approx. 20g
Interfaces: via USB or RS-232; RS-232
READ / WRITE DISTANCE up to 100 mm depending on environment and transponder transmission speed
NFC Active and passive communication mode
Dimensions: 88mm x 56mm x 18mm
Weight approx. 20g
Powerful SDK for writing apps directly on the reader.
Internal 18kB data memory, e.g. for storing user-accessible, non-erasable data. Support for direct chip commands.
On-board Secure Access Module (SAM) slot.
CCID and PC/SC 2.01
3 GPIOs
3D model (STEP) on request supports fast, centralised (re-)configuration via network or wireless interface with TWN4 CONFIG Card
Internal 18kB data memory, e.g. for storing user-accessible, non-erasable data. Support for direct chip commands.
On-board Secure Access Module (SAM) slot.
CCID and PC/SC 2.01
3 GPIOs
3D model (STEP) on request supports fast, centralised (re-)configuration via network or wireless interface with TWN4 CONFIG Card
MPN: T4BT-FB2BEL6
- Data Sheet TWN4 Mifare NFC - T4DT-FB2BEL (225.21 KB)
* The reviews are not checked for authenticity before they are published. They can therefore also come from consumers who have not actually purchased/used the rated products.
If you do not see any reviews here although they are already available, the reviews are in German language. Change the language at the top and the customer reviews can be read.
